Gordon Brush Logo
Gordon Brush is the winner of the 2018 made in America award
Log In     Cart (0)


ISO 9001:2015 Certified

Proud To Be An AMERICAN Manufacturer

Need Help? Call 323-724-7777 / 800-950-7950


Products
ESD Category
Insulative
Fill Material
Brass/Nylon
Camel Hair
Hog Bristle
Nylon
Red Sable
Sabeline
Stainless Steel/Nylon
Taklon
Diameter
Minimum:
Maximum:

Trim
Minimum:
Maximum:

Body Diameter
Minimum:
Maximum:

Orifice Size
.033"
.038"
.063"
.093"
Needle Gauge
Minimum:
Maximum:

Thread Type
Female
Male
Thread Size
3/8-24
6-32
10-24
10-32
Handle Size (L x D)
4 1/2" X 3/8"
Brush Diameter
1/2"
Housing Material
Stainless Steel
  Cost
VIEW ALL
Under $5
$5 - $9.99
$10 - $14.99
$15 - $19.99
$20 - $24.99
$25 & Above
Number of Categories: 3    

Flow Thru Brushes

Flow Thru brushes have been called various names throughout the years. The name represents the function of the brush: It is constructed to enable liquid to flow through the synthetic or natural fills for application. The brushes can be attached to a wide variety of media that dispense liquid, and are made out of many types of fill material and configurations. The opposite of a Flow Thru Brush is a vacuum brush. Vacuum brushes use fills to direct the flow of liquids or solids up through the brush rather than down the brush. If the reverse action of a brush is required, look toward a vacuum brush for your application.

For a specific brush you may need, further scan this Web site or call us at 1-800-950-7950 or 1-323-724-7777. If you know you need a custom brush, complete the Flow Thru Brush Custom Design Sheet that follows and fax it back to us. Gordon Brush will get back to you within 24 hours with a quotation.



COPYRIGHT © 2018 Gordon Brush Mfg. Co., Inc.
ALL RIGHTS RESERVED

WEBSITE DEVELOPED BY:  EMSAR DESIGN LTD