Gordon Brush Logo
Log In     Cart (0)


ISO 9001:2015 Certified

Proud To Be An AMERICAN Manufacturer

Need Help? Call 323-724-7777 / 800-950-7950


Products
ESD Category
Anti-Static
Insulative
Fill Material
Brass
Brass/Horse Hair
Carbon Steel
Hog Bristle
Horse Hair
Nylon
Phosphor Bronze
Plyer
Polypropylene
Stainless Steel
Stainless Steel/Horse Hair
Tampico
Block Material
Aluminum
Plastic
Wood
Brush Face
2 1/4" X 1 1/4"
3 1/4" X 2"
3 7/8" X 2 1/4"
4 1/4" X 1 1/2"
6 1/2" X 1 3/4"
6 5/8" X 1 7/8"
22 1/2" X 1/4"
29 1/2" X 1/4"
35 1/2" X 1/4"
47 1/2" X 1/4"
59 1/2" X 1/4"
63 1/2" X 1/4"
Trim
Minimum:
Maximum:

Rows
Minimum:
Maximum:

Block Size
2 1/2" X 1 3/8"
2 1/2" X 1 7/16"
3 1/2" X 2 1/4"
4 1/4" X 2 1/2"
4 1/2" X 1 3/4"
7 1/8" X 2 1/4"
23" X 1"
26 1/2" X 2"
30" X 1"
36" X 1"
48" X 1"
60" X 1"
64" X 1"
Bristle Diameter
Minimum:
Maximum:

  Cost
VIEW ALL
Under $5
$5 - $9.99
$10 - $14.99
$15 - $19.99
$20 - $24.99
$25 & Above
Number of Categories: 4    

Block Brushes

A brush block, or back, is manufactured through the drilling of holes and insertion of fill tufts into those holes. Commonly made out of plastic, metal, or wood, block brushes can be manufactured with any type of filament. Brush fills may range from hard to soft in stiffness, and large to fine in diameter. The uses for block brushes are virtually limitless. The fill material used in the brush can come from natural, synthetic, or metal sources. General applications for any Block brushes are: Applying, Pushing, Removing, Cleaning, Spreading, or acting as a Barrier.



COPYRIGHT © 2018 Gordon Brush Mfg. Co., Inc.
ALL RIGHTS RESERVED

WEBSITE DEVELOPED BY:  EMSAR DESIGN LTD