This conductive applicator brush has 0.003" soft brass wire and a stainless steel tube handle. Constructed with strong mechanical clamping for maximum fill retention, and contains no adhesives that can leach out and contaminate work areas. 1/2" trim, brush face 7/16" wide, and a handle length of 4-3/4" x 5/16" diameter. This brush has a maximum use temperature of 500°F.
For other brush size options within this series using 0.003" brass wire, see parts: SST2B, SST6B, SST12B.
Conductive brushes have a surface resistivity range of 10²Ω/cm – 10⁴Ω/cm and are used to remove static buildup from the work surface. Conductive brushes will act as a conduit between the charged surface and the path to ground. Made with fully conductive materials that are active static eliminators. Use conductive brushes with a wrist strap or other mechanism to provide a path to ground.
Not sure which block brush you need for your business?
Our customer service representatives can answer your questions. Call us at: 1-800-950-7950 or 1-323-724-7777

Two wood block brushes with unique NSN numbers and nylon fill are available in this category. A National Stock Number (also known as a NATO Stock Number) is simply the official label applied to an item of supply that is repeatedly procured, stocked, stored, issued, and used throughout the federal supply system.
Other selectable parameters are, trim length, block length, and bristle diameter. One of these brushes is on clearance because of limited stock on hand. Get this brush while supplies last.
Call Gordon Brush® today at 323-724-777 or email us at [email protected] if you want to learn about our entire stock of brushes by NSN number.
| Phone: | 323-724-7777 |
| Toll-Free: | 800-950-7950 |
| Fax: | 323-724-1111 |